trucks for downhill i dont know but i have a landyachtz battleaxe 2012 wich is a cruising carving board and i have my trucks very loose only so about mabye 4millimeters of little like ridged thing the bolt goes on is showing. this gets u fast turns and is very helpful
@perfectmistakes666 I am certainly using abec7 they are okay and it’s stock board I recommend going to your friend who has been riding for awhile and ask them what set you should use and depending on what your using it for is the type of bearings you should use
i just got my longboard from nordboards and i dont think it was assembled right..
only one wheel moves freely, and when i tried to loosen the bolt on the other wheels they still did not move as fast as the one wheel… the wheels that i loosened the bolt on got so loose that they even moved back and forth on the truck.
does that mean that the wheels were not put on the truck itself correctly? how do i fix this?
i want the wheels to move the same and fast like the origina
just my point of view, but if im going for some serious downhill action, i will really get something that i know it won’t pop out in the middle of like some crazy blazing fast rolling… Long live bones swiss ceramic, i have so much peace in mind when i use them lmfao O_o, other bearing works fine, but i have never get so much peace in mind before :D, those are like industructable, you can not clean them for like a year and it will still roll like brand new reds or something, it wont die!!GOSK8!
37 comments
Skip to comment form ↓
Eric Traynor
July 8, 2012 at 6:36 pm (UTC 0) Link to this comment
I put the bearings in acetone before I put the lubricant on.
WyoCole
July 8, 2012 at 6:38 pm (UTC 0) Link to this comment
50% alcohol means the other 50% is water. water = rust
STUsTUDL3r
July 8, 2012 at 7:13 pm (UTC 0) Link to this comment
trucks for downhill i dont know but i have a landyachtz battleaxe 2012 wich is a cruising carving board and i have my trucks very loose only so about mabye 4millimeters of little like ridged thing the bolt goes on is showing. this gets u fast turns and is very helpful
mklinger23
July 8, 2012 at 8:03 pm (UTC 0) Link to this comment
Yo before u lube up da bearings soak em in rubbin alcohol for a haf hour
MrPlums101
July 8, 2012 at 8:42 pm (UTC 0) Link to this comment
i wish i lived where it was a least a lil hilly lol
shadpourshayan
July 8, 2012 at 9:01 pm (UTC 0) Link to this comment
what should I lube my bones super reds with?
willywill1997
July 8, 2012 at 9:45 pm (UTC 0) Link to this comment
Thanks so much for this, it really helped me out!
KevinHomicide
July 8, 2012 at 9:51 pm (UTC 0) Link to this comment
@perfectmistakes666 I am certainly using abec7 they are okay and it’s stock board I recommend going to your friend who has been riding for awhile and ask them what set you should use and depending on what your using it for is the type of bearings you should use
MrSinun
July 8, 2012 at 10:13 pm (UTC 0) Link to this comment
Great vid man. Well explained, good visuals, tip top choice of tune.
fabrixx08
July 8, 2012 at 10:14 pm (UTC 0) Link to this comment
kings of leon :)
TheCowboyrocks
July 8, 2012 at 10:32 pm (UTC 0) Link to this comment
you can just use rubbing alcohol
TheCowboyrocks
July 8, 2012 at 11:04 pm (UTC 0) Link to this comment
thanks for putting this on Youtube! only vid I could find that showed me how to do it!
ToustiPousti
July 8, 2012 at 11:39 pm (UTC 0) Link to this comment
abec 7
SouthStokedFilms
July 8, 2012 at 11:52 pm (UTC 0) Link to this comment
Bones are allways good i’ll go with the Bones Super Reds.
perfectmistakes666
July 8, 2012 at 11:59 pm (UTC 0) Link to this comment
hmm should i use abec 11’s abec 7’s or abec 5’s? whats the best bearings?
carsonisaboss
July 9, 2012 at 12:33 am (UTC 0) Link to this comment
dude you make some nice videos
lvl100pokes
July 9, 2012 at 1:02 am (UTC 0) Link to this comment
nice in heats
1132Cloud
July 9, 2012 at 1:42 am (UTC 0) Link to this comment
mine doesnt have any spacers. Is that a bad thing?
pivotfight3r
July 9, 2012 at 2:41 am (UTC 0) Link to this comment
I lube mine as well =)
simpletrickz1
July 9, 2012 at 3:24 am (UTC 0) Link to this comment
finally someone calls those little things washers instead of speed rings.
CrackrjacksSC
July 9, 2012 at 3:50 am (UTC 0) Link to this comment
Hey if anyone could help me? What type of lube or oil would you use to clean your bearings correctly?
screamingmimi456
July 9, 2012 at 4:05 am (UTC 0) Link to this comment
could u use grease to lube the bearings
Luke13PL
July 9, 2012 at 4:22 am (UTC 0) Link to this comment
i just got my longboard from nordboards and i dont think it was assembled right..
only one wheel moves freely, and when i tried to loosen the bolt on the other wheels they still did not move as fast as the one wheel… the wheels that i loosened the bolt on got so loose that they even moved back and forth on the truck.
does that mean that the wheels were not put on the truck itself correctly? how do i fix this?
i want the wheels to move the same and fast like the origina
skyking166
July 9, 2012 at 4:51 am (UTC 0) Link to this comment
just my point of view, but if im going for some serious downhill action, i will really get something that i know it won’t pop out in the middle of like some crazy blazing fast rolling… Long live bones swiss ceramic, i have so much peace in mind when i use them lmfao O_o, other bearing works fine, but i have never get so much peace in mind before :D, those are like industructable, you can not clean them for like a year and it will still roll like brand new reds or something, it wont die!!GOSK8!
alexanderanthony
July 9, 2012 at 5:44 am (UTC 0) Link to this comment
Real song…
tontonglouglou
July 9, 2012 at 6:16 am (UTC 0) Link to this comment
i hear a cry on the wind like a voice from afar..
i’m a stranger here , don’t know where i’m gone..
p’tin c’est beau comme du Bayrou çà…!
finoltwice
July 9, 2012 at 7:08 am (UTC 0) Link to this comment
Po prostu rewelacja!!!!!!!!!!!!!!!!!!
kakkien1
July 9, 2012 at 7:51 am (UTC 0) Link to this comment
T O G L I E TE IL F A C C I O NE DI berlusconi per favore DAWERO!!!!!!!!
mrengftw
July 9, 2012 at 8:28 am (UTC 0) Link to this comment
This is the real version. Nice one. I hate all those covers.
redouane175
July 9, 2012 at 9:09 am (UTC 0) Link to this comment
SOUVENIR SOUVENIR GREAT SOND AT ALL THE TIME
rseeruttun
July 9, 2012 at 9:27 am (UTC 0) Link to this comment
too good,too great…
rabfaethetoon
July 9, 2012 at 9:58 am (UTC 0) Link to this comment
been waiting on this song for years thanx for posting its a gem
grahampiper1969
July 9, 2012 at 10:21 am (UTC 0) Link to this comment
a fantastic and wonderful song.
jsebsteelguitar
July 9, 2012 at 10:49 am (UTC 0) Link to this comment
Just a wonderful song.
Schon23x
July 9, 2012 at 11:25 am (UTC 0) Link to this comment
Just great
Marikablue
July 9, 2012 at 11:50 am (UTC 0) Link to this comment
Yeah, one of the best songs from the NHB album.
diplob
July 9, 2012 at 12:07 pm (UTC 0) Link to this comment
That’s a fantastic song!