you got the right idea……. but dont drill a hole…..do not remove from ring just pop all but one bead lock screw only take it out half way .. cool it just screw the rest down.. same thing..
I will try to answer. Because they are beadlocks nothing is required to seal the tires. To assure that all the tires are the same size the “in” time and the”out” time(tires in the freezer) must be as close as possible.
no, you need a hole and you need to seal it while its cold.
cold air is dense, once the wheel is back at room temperature and sealed, the air inside is now under pressure.
just sticking a wheel in the freezer and removing it wont make a bit of difference
25 comments
Skip to comment form ↓
remotecontrolhorror
August 25, 2012 at 2:43 pm (UTC 0) Link to this comment
that’s badass, and you’re a genius..
VeghTheHun
August 25, 2012 at 3:18 pm (UTC 0) Link to this comment
I am sure he meant after you pull it out of the freezer…
qlkgg7
August 25, 2012 at 3:38 pm (UTC 0) Link to this comment
It won’t work. Once the tires cool to room temperature they will be flat.
smokinrcguy29
August 25, 2012 at 4:16 pm (UTC 0) Link to this comment
A sink of hot water works too to inflate
thehobbyist88
August 25, 2012 at 5:11 pm (UTC 0) Link to this comment
can you do that with stampede tires
Rcnation101
August 25, 2012 at 5:20 pm (UTC 0) Link to this comment
Do u take the fomes out
spookymisfit
August 25, 2012 at 5:44 pm (UTC 0) Link to this comment
15-40mins in the freezer works good for me
boboski1986
August 25, 2012 at 6:12 pm (UTC 0) Link to this comment
how much time in freezer?
TheACE195
August 25, 2012 at 6:26 pm (UTC 0) Link to this comment
man that is awesome
backintack
August 25, 2012 at 7:11 pm (UTC 0) Link to this comment
Haha Boneless Chicken Breasts
richardgarrett1
August 25, 2012 at 7:19 pm (UTC 0) Link to this comment
you got the right idea……. but dont drill a hole…..do not remove from ring just pop all but one bead lock screw only take it out half way .. cool it just screw the rest down.. same thing..
qlkgg7
August 25, 2012 at 7:59 pm (UTC 0) Link to this comment
I will try to answer. Because they are beadlocks nothing is required to seal the tires. To assure that all the tires are the same size the “in” time and the”out” time(tires in the freezer) must be as close as possible.
akodin02
August 25, 2012 at 8:29 pm (UTC 0) Link to this comment
what did you used to seal the tires???
how can i assure that all the size of the four tires are the same???
this is a one good idea!!!
rcisme1
August 25, 2012 at 9:27 pm (UTC 0) Link to this comment
and it will float better on water and if you want speed it’s holds the tire up so it goes faster
rcisme1
August 25, 2012 at 9:33 pm (UTC 0) Link to this comment
i was wondering the same thing
DETPower
August 25, 2012 at 10:24 pm (UTC 0) Link to this comment
what beadlocks are those?
obzelite
August 25, 2012 at 10:48 pm (UTC 0) Link to this comment
no, you need a hole and you need to seal it while its cold.
cold air is dense, once the wheel is back at room temperature and sealed, the air inside is now under pressure.
just sticking a wheel in the freezer and removing it wont make a bit of difference
qlkgg7
August 25, 2012 at 11:24 pm (UTC 0) Link to this comment
as long as there are no leaks they will hold the pressure. Iv seen around 1.5 years. Hope it helps!
bayareaaxialcrawler
August 25, 2012 at 11:26 pm (UTC 0) Link to this comment
how long does the tire stay aired up
joehanson7070
August 25, 2012 at 11:41 pm (UTC 0) Link to this comment
hi i have beadlocks on my stadium truck i did this with your advice increases speed and performance alot thanks
qlkgg7
August 25, 2012 at 11:47 pm (UTC 0) Link to this comment
no foam
qlkgg7
August 26, 2012 at 12:15 am (UTC 0) Link to this comment
no phoam
aud6875
August 26, 2012 at 12:17 am (UTC 0) Link to this comment
do u have to have tire foam in the
Morongotongo123
August 26, 2012 at 12:26 am (UTC 0) Link to this comment
can this be done on rc4wd 1.9 scale wheels … they came without hole ..
so i was wondering if i only put in the freezer then i just put some hot on it ?
or it wouldnt work .. anyone has tried yet ?
thank you ***** for excellent video
dkbmx789
August 26, 2012 at 12:43 am (UTC 0) Link to this comment
thats awsome, i will try it